-----BEGIN PGP SIGNED MESSAGE----- __________________________________________________________ The U.S. Department of Energy Computer Incident Advisory Capability ___ __ __ _ ___ / | /_\ / \___ __|__ / \ \___ __________________________________________________________ INFORMATION BULLETIN UNIX Buffer Overflow in rdist Vulnerability November 20, 1998 17:00 GMT Number H-107 ______________________________________________________________________________ PROBLEM: A new vulnerability has been found in some set-user-id root implementations of rdist. PLATFORM: UNIX operating systems - vendors are listed below in Section III. DAMAGE: This vulnerability may allow local users to gain root privileges. SOLUTION: Apply a vendor patch or a freely available version of rdist that does not need to be installed as set-user-id root. VULNERABILITY Exploit information involving these vulnerabilities have been ASSESSMENT: made publicly available. ______________________________________________________________________________ [ Updated November 20, 1998 with additional patch information from Sun Microsystems, Inc. ] [ Start CERT Advisory ] ============================================================================= CERT* Advisory CA-97.23 Original issue date: September 16, 1997 Last revised: -- Topic: Buffer Overflow Problem in rdist - ------------------------------------------------------------------------------ The CERT Coordination Center has received reports of a vulnerability in rdist that enables anyone with access to a local account to gain root privileges. This is not the same vulnerability as the one discussed in CA-96.14. Section III.A contains instructions on how to determine if your site is vulnerable. If your implementation of rdist is vulnerable, the CERT/CC team encourages you to follow your vendor's instructions (Sec. III.B and Appendix A) or install a freely available version of the rdist program that is not installed as set-user-id root and is, therefore, not susceptible to the exploitation described in this advisory (Sec. III.C). For information on the earlier problem with rdist, see ftp://info.cert.org/pub/cert_advisories/CA-96.14.rdist_vul We will update this advisory as we receive additional information. Please check our advisory files regularly for updates that relate to your site. - ------------------------------------------------------------------------------ I. Description The rdist program is a UNIX Operating System utility used to distribute files from one host to another. On some systems, rdist opens network connections using a privileged port as the source port. This requires root privileges, and to attain these privileges rdist on such systems is installed set-user-id root. A new vulnerability has been found in some set-user-id root implementations of rdist. The vulnerability lies in the function expstr(), where macros supplied as arguments are expanded using sprintf(). It is possible to overwrite stack frames and call specially pre-crafted native machine code. If the appropriate machine code is supplied, an attacker can execute arbitrary programs (such as the shell) with set-user-id root privileges. Note that this vulnerability is distinct from that discussed in CERT advisory CA-96.14. II. Impact On systems with a vulnerable copy of rdist, anyone with access to a local account can gain root access. III. Solution We urge you to follow the steps in Section A to determine if your system is vulnerable and, if it is, to turn off rdist while you decide how to proceed. If your system is vulnerable and you need the functionality that rdist provides, you should install a vendor patch (Section B). Until you can do so, you may want to use a freely available version of rdist that does not need to be installed as set-user-id root and is, therefore, not susceptible to the exploitation described in this advisory (Section C). A. How to check for set-user-id root versions of rdist To find set-user-id root versions of rdist and to disable the programs that are possibly vulnerable, use the following find command or a variant. Consult your local system documentation to determine how to tailor the find program on your system. You will need to run the find command on each system you maintain because the command examines files on the local disk only. Substitute the names of your local file systems for FILE_SYSTEM_NAMES in the example. Example local file system names are /, /usr, and /var. You must do this as root. Note that this is one long command, though we have separated it onto three lines using backslashes. find FILE_SYSTEM_NAMES -xdev -type f -user root \ -name '*rdist*' -perm -04000 -exec ls -l '{}' \; \ -ok chmod 0500 '{}' \; This command will find all files on a system that - are only in the file system you name (FILE_SYSTEM_NAMES -xdev) - are regular files (-type f) - are owned by root (-user root) - have "rdist" as a component of the name (-name '*rdist*') - are setuid (-perm -04000) Once found, those files will - have their names and details printed (-exec ls -l '{}') - have the setuid mode removed (making the file available only to root) but only if you type `y' in response to the prompt (-ok chmod 0500 '{}' \;) B. Obtain and install the appropriate patch Below is a list of vendors who have provided information for this advisory. Details are in Appendix A, and we will update the appendix as we receive more information. Berkeley Software Design, Inc. (BSDI) Digital Equipment Corp. FreeBSD, Inc. Hewlett-Packard Company IBM Corporation NEC Corporation The Santa Cruz Operation, Inc. (SCO) Siemens-Nixdorf Silicon Graphics Inc. (SGI) Sun Microsystems, Inc. If your vendor's name is not on this list, please contact the vendor directly. C. If you need the functionality that rdist provides but a patched version is not yet available from your vendor, consider installing rdist-6.1.3, which is freely available from ftp://usc.edu/pub/rdist/rdist-6.1.3.tar.gz MD5 (rdist-6.1.3.tar.gz) = 8a76b880b023c5e648b7cb77b9608b9f The README file in the distribution explains how to configure and install this version of rdist. We recommend that you configure this version of rdist to use rsh instead of rcmd. Here is the relevant text from the README: By default rdist uses rsh(1c) to make connections to remote hosts. This has the advantage that rdist does not need to be setuid to "root". This eliminates most potential security holes. It has the disadvantage that it takes slightly more time for rdist to connect to a remote host due to the added overhead of doing a fork() and then running the rsh(1c) command. Some sites with sufficient expertise use the ssh program in conjunction with rdist, instead of using rcmd or rsh. If you have the expertise, you may want to implement this configuration. For further details on this option see "Ssh (Secure Shell) FAQ - Frequently asked questions," Section 4.4, "Can I use rdist with ssh?" It is available from http://www.uni-karlsruhe.de/~ig25/ssh-faq/ssh-faq-4.html For details on how to obtain ssh, see FAQ Section 3.4, "Where can I obtain ssh?" This section can be found in http://www.uni-karlsruhe.de/~ig25/ssh-faq/ssh-faq-3.html ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Appendix A - Vendor Information Below is a list of the vendors who have provided information for this advisory. We will update this appendix as we receive additional information. If you do not see your vendor's name, the CERT/CC did not hear from that vendor. Please contact the vendor directly. Berkeley Software Design, Inc. (BSDI) ===================================== BSDI shipped a patch for this for our 2.1 release (U210-018) when the original Bugtraq advisory was released. The 3.0 version of rdist is not vulnerable and in fact is no longer even setuid. Digital Equipment Corp. ======================= This reported problem is not present for Digital's ULTRIX or Digital UNIX Operating Systems Software. DIGITAL EQUIPMENT CORPORATION ----------------------------- FreeBSD, Inc. ============= 2.1.0 is vulnerable. 2.1.5, 2.1.6 and 2.1.7 are and 2.1-stable are not. In any case, upgrading to 2.1.7 or even better, 2.1-stable should be considered. If there is demand, we'll release a patch for 2.1.0 All 2.2 releases, 2.2-stable and FreeBSD-current are not vulnerable. Hewlett-Packard Company ======================= HP is -not- vulnerable; the problem didn't exist in 9.X, and has been fixed in 10.X with Security Bulletin #36 (HPSBUX9608-036) last year. Patch numbers change frequently because of cumulative patching, so please check current patch ID information either by bulletin or by platform/release at our HP Electronic Support Center in the "Security Patch Matrix," which is updated every 24 hours. 1) From your Web browser, access the URL: http://us-support.external.hp.com (US,Canada,Asia-Pacific, and Latin-America) http://europe-support.external.hp.com (Europe) 2) On the HP Electronic Support Center main screen, select the hyperlink "Support Information Digests". 3) On the "Welcome to HP's Support Information Digests" screen, under the heading "Register Now", select the appropriate hyperlink "Americas and Asia-Pacific", or "Europe". 4) On the "New User Registration" screen, fill in the fields for the User Information and Password and then select the button labeled "Submit New User". 5) On the "User ID Assigned" screen, select the hyperlink "Support Information Digests". **Note what your assigned user ID and password are for future reference. 6) You should now be on the "HP Support Information Digests Main" screen. You might want to verify that your email address is correct as displayed on the screen. From this screen, you may also view/subscribe to the digests, including the security bulletins digest. To get a patch matrix of current HP-UX and BLS security patches referenced by either Security Bulletin or Platform/OS, click on following screens in order: Technical Knowledge Database Browse the HP Security Bulletins Archive HP-UX Security Patch Matrix IBM Corporation =============== All versions of AIX are vulnerable to this buffer overflow. There is no 3.2 fix. It is recommended that 3.2 customers upgrade to a higher level. The following APARs will be available for AIX version 4 soon. AIX 3.2: upgrade to 4.1.5 or higher AIX 4.1: IX70876 AIX 4.2: IX70875 To Order -------- APARs may be ordered using Electronic Fix Distribution (via FixDist) or from the IBM Support Center. For more information on FixDist, reference URL: http://service.software.ibm.com/aixsupport/ or send e-mail to aixserv@austin.ibm.com with a subject of "FixDist". IBM and AIX are registered trademarks of International Business Machines Corporation. NEC Corporation =============== The following systems are NOT affected by this vulnerability: UX/4800 UX/4800(64) EWS-UX/V(Rel4.2MP) EWS-UX/V(Rel4.2) UP-UX/V(Rel4.2MP) To report a new vulnerability, contact . The Santa Cruz Operation, Inc. (SCO) ==================================== SCO has determined that the following SCO operating systems are not vulnerable: - SCO CMW+ 3.0 - SCO Open Desktop/Open Server 3.0 - SCO OpenServer 5.0 - SCO UnixWare 2.1 Siemens-Nixdorf Informationssysteme AG ====================================== Siemens-Nixdorf does not ship rdist. Silicon Graphics Inc. (SGI) =========================== At this time, Silicon Graphics does not have any public information for the rdist buffer overflow issue. Silicon Graphics has communicated with CERT/CC and other external security parties and is actively investigating this issue. When more Silicon Graphics information (including any possible patches) is available for release, that information will be released via the SGI security mailing list, wiretap. For subscribing to the wiretap mailing list and other SGI security related information, please refer to the Silicon Graphics Security Headquarters website located at: http://www.sgi.com/Support/security/security.html Sun Microsystems, Inc. ====================== We are producing patches. - ------------------------------------------------------------------------------ The CERT Coordination Center thanks Hiroshi Nakano of Ryukoku University, Japan for reporting this problem. We also thank Wolfgang Ley of DFN-CERT for his assistance with the Solutions section of the advisory. - ------------------------------------------------------------------------------ [ End CERT Advisory ] [ Start Sun Microsystems Advisory ] ________________________________________________________________________________ Sun Microsystems, Inc. Security Bulletin Bulletin Number: #00179 Date: November 18, 1998 Cross-Ref: Title: rdist ________________________________________________________________________________ The information contained in this Security Bulletin is provided "AS IS." Sun makes no warranties of any kind whatsoever with respect to the information contained in this Security Bulletin. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT OR IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED TO THE EXTENT ALLOWED BY APPLICABLE LAW. IN NO EVENT WILL SUN MICROSYSTEMS, INC. BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES HOWEVER CAUSED AND REGARDLESS OF ANY THEORY OF LIABILITY ARISING OUT OF THE USE OF OR INABILITY TO USE THE INFORMATION CONTAINED IN THIS SECURITY BULLETIN, EVEN IF SUN MICROSYSTEMS, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. If any of the above provisions are held to be in violation of applicable law, void, or unenforceable in any jurisdiction, then such provisions are waived to the extent necessary for this disclaimer to be otherwise enforceable in such jurisdiction. ________________________________________________________________________________ 1. Background The rdist program is a setuid root utility that distributes files from one host to another. Several buffer overflow vulnerabilities have been discovered which could be exploited by an attacker to gain root access. 2. Affected Supported Versions Solaris(tm) versions: 2.6, 2.6_x86, 2.5.1, 2.5.1_x86, 2.5, 2.5_x86, 2.4, 2.4_x86 and 2.3 SunOS(tm) versions: 4.1.4 and 4.1.3_U1 3. Recommendations Sun recommends that you install the respective patches immediately on affected systems. Operating System Patch ID _________________ _________ Solaris 2.6 105667-02 Solaris 2.6_x86 105668-02 Solaris 2.5.1 103817-03 Solaris 2.5.1_x86 103818-03 Solaris 2.5 103815-03 Solaris 2.5_x86 103816-03 Solaris 2.4 103813-03 Solaris 2.4_x86 103814-03 Solaris 2.3 101494-04 SunOS 4.1.4 103824-04 SunOS 4.1.3_U1 103823-04 _______________________________________________________________________________ APPENDICES A. Patches listed in this bulletin are available to all Sun customers via World Wide Web at: B. Checksums for the patches listed in this bulletin are available via World Wide Web at: C. Sun security bulletins are available via World Wide Web at: D. Sun Security Coordination Team's PGP key is available via World Wide Web at: E. To report or inquire about a security problem with Sun software, contact one or more of the following: - Your local Sun answer centers - Your representative computer security response team, such as CERT - Sun Security Coordination Team. Send email to: security-alert@sun.com F. To receive information or subscribe to our CWS (Customer Warning System) mailing list, send email to: security-alert@sun.com with a subject line (not body) containing one of the following commands: Command Information Returned/Action Taken _______ _________________________________ help An explanation of how to get information key Sun Security Coordination Team's PGP key list A list of current security topics query [topic] The email is treated as an inquiry and is forwarded to the Security Coordination Team report [topic] The email is treated as a security report and is forwarded to the Security Coordination Team. Please encrypt sensitive mail using Sun Security Coordination Team's PGP key send topic A short status summary or bulletin. For example, to retrieve a Security Bulletin #00138, supply the following in the subject line (not body): send #138 subscribe Sender is added to our mailing list. To subscribe, supply the following in the subject line (not body): subscribe cws your-email-address Note that your-email-address should be substituted by your email address. unsubscribe Sender is removed from the CWS mailing list. ________________________________________________________________________________ Copyright 1998 Sun Microsystems, Inc. All rights reserved. Sun, Sun Microsystems, Solaris and SunOS are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. This Security Bulletin may be reproduced and distributed, provided that this Security Bulletin is not modified in any way and is attributed to Sun Microsystems, Inc. and provided that such reproduction and distribution is performed for non-commercial purposes. [ End Sun Microsystems Advisory ] ______________________________________________________________________________ CIAC wishes to acknowledge the contributions of CERT for the information contained in this bulletin. ______________________________________________________________________________ CIAC, the Computer Incident Advisory Capability, is the computer security incident response team for the U.S. Department of Energy (DOE) and the emergency backup response team for the National Institutes of Health (NIH). CIAC is located at the Lawrence Livermore National Laboratory in Livermore, California. CIAC is also a founding member of FIRST, the Forum of Incident Response and Security Teams, a global organization established to foster cooperation and coordination among computer security teams worldwide. CIAC services are available to DOE, DOE contractors, and the NIH. CIAC can be contacted at: Voice: +1 510-422-8193 FAX: +1 510-423-8002 STU-III: +1 510-423-2604 E-mail: ciac@llnl.gov For emergencies and off-hour assistance, DOE, DOE contractor sites, and the NIH may contact CIAC 24-hours a day. During off hours (5PM - 8AM PST), call the CIAC voice number 510-422-8193 and leave a message, or call 800-759-7243 (800-SKY-PAGE) to send a Sky Page. CIAC has two Sky Page PIN numbers, the primary PIN number, 8550070, is for the CIAC duty person, and the secondary PIN number, 8550074 is for the CIAC Project Leader. Previous CIAC notices, anti-virus software, and other information are available from the CIAC Computer Security Archive. World Wide Web: http://ciac.llnl.gov/ Anonymous FTP: ciac.llnl.gov (198.128.39.53) Modem access: +1 (510) 423-4753 (28.8K baud) +1 (510) 423-3331 (28.8K baud) CIAC has several self-subscribing mailing lists for electronic publications: 1. CIAC-BULLETIN for Advisories, highest priority - time critical information and Bulletins, important computer security information; 2. CIAC-NOTES for Notes, a collection of computer security articles; 3. SPI-ANNOUNCE for official news about Security Profile Inspector (SPI) software updates, new features, distribution and availability; 4. SPI-NOTES, for discussion of problems and solutions regarding the use of SPI products. Our mailing lists are managed by a public domain software package called Majordomo, which ignores E-mail header subject lines. To subscribe (add yourself) to one of our mailing lists, send the following request as the E-mail message body, substituting ciac-bulletin, ciac-notes, spi-announce OR spi-notes for list-name: E-mail to ciac-listproc@llnl.gov or majordomo@tholia.llnl.gov: subscribe list-name e.g., subscribe ciac-notes You will receive an acknowledgment email immediately with a confirmation that you will need to mail back to the addresses above, as per the instructions in the email. This is a partial protection to make sure you are really the one who asked to be signed up for the list in question. If you include the word 'help' in the body of an email to the above address, it will also send back an information file on how to subscribe/unsubscribe, get past issues of CIAC bulletins via email, etc. PLEASE NOTE: Many users outside of the DOE, ESnet, and NIH computing communities receive CIAC bulletins. If you are not part of these communities, please contact your agency's response team to report incidents. Your agency's team will coordinate with CIAC. The Forum of Incident Response and Security Teams (FIRST) is a world-wide organization. A list of FIRST member organizations and their constituencies can be obtained via WWW at http://www.first.org/. This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation or favoring by the United States Government or the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or the University of California, and shall not be used for advertising or product endorsement purposes. LAST 10 CIAC BULLETINS ISSUED (Previous bulletins available from CIAC) H-97: SGI IRIX ftpd Signal Handling Vulnerability H-98: SunOS automounter Vulnerability H-99: SunOS, Solaris ifconfig ioctls Vulnerability H-100: SunOS, Solaris libXt Vulnerability H-101: FreeBSD procfs Vulnerability H-102: SGI IRIX webdist.cgi, handler and wrap programs Vulnerabilities H-103: HP-UX X11/Motif Libraries Vulnerability H-104: HP-UX libXt Vulnerability H-105: HP-UX vuefile, vuepad, dtfile, & dtpad Vulnerabilities H-106: SGI IRIX LOCKOUT & login/scheme Vulnerabilities -----BEGIN PGP SIGNATURE----- Version: 4.0 Business Edition iQCVAwUBNCBhV7nzJzdsy3QZAQEe3AQAs7KjXHWKRei3l8YlGd878tgsy5IIVH24 GPhP+Oeak7fQ4wG1SYGqTurbwpJxerOfOwVWXkPCUE7aIlutY+SVXH11Am5h0/6z n5XHiAGbIY+Q1DQBK2yU7obGttvrGdLERMt5JIlcRnnWcmx1wmhkJp3cjLDy7PSr b3rRCZsRpqU= =8my1 -----END PGP SIGNATURE-----