Controlling bias and inflation in association studies using the empirical null distribution
29 October 2024
Package
bacon 1.35.0
modified: Sat Jan 20 08:18:27 2018 compiled: Tue Oct 29 16:14:26 2024
1 Introduction
bacon can be used to remove inflation and bias often observed in epigenome- and transcriptome-wide association studies (Iterson, Zwet, and Heijmans 2017).
To this end bacon constructs an empirical null distribution using a Gibbs Sampling algorithm by fitting a three-component normal mixture on z-scores. One component is forced, using prior knowledge, to represent the null distribution with mean and standard deviation representing the bias and inflation. The other two components are necessary to capture the amount of true associations present in the data, which we assume unknown but small.
bacon provides functionality to inspect the output of the Gibbs Sampling algorithm, i.e., plots of traces, posterior distributions and the mixture fit, are provided. Furthermore, inflation- and bias-corrected test-statistics, effect-sizes and standard errors, or P-values are extracted easily. In addition, functionality for performing fixed-effect meta-analysis and obtaining inflation- and bias-corrected statistics with a 95% Confidence Interval (CI) are provided as well.
The function bacon requires a vector or a matrix of z-scores and/or
effect-sizes and standard errors, e.g., those extracted from
association analyses using a linear regression approach. For
fixed-effect meta-analysis a matrix of effect-sizes and
standard-errors is required.
This vignette illustrates the use of bacon using simulated z-scores, effect-sizes and standard errors to avoid long run-times. If multiple sets of test-statisics or effect-sizes and standard-errors are provided, the Gibbs Sampler algorithm can be executed in parallel to reduce computation time using functionality provide by BiocParallel-package.
2 A single set of test-statistics
A vector containing \(5000\) z-scores is generated from a normal mixture
distribution, \(90\%\) of the z-scores were drawn from a biased and
inflated null distribution, \(\mathcal{N}(0.2, 1.3)\), and the remaining
z-scores from \(\mathcal{N}(\mu, 1)\), where \(\mu \sim \mathcal{N}(4, 1)\). The rnormmix-function provided by Bacon generates a vector of
random test-statistics described above optionally with different
parameters.
y <- rnormmix(5000, c(0.9, 0.2, 1.3, 1, 4, 1))The function bacon executes the Gibbs Sampler algorithm and stores
all in- and out-put in an object of class Bacon. Several
accessor-functions are available to access data contained in the
Bacon-object, e.g. for obtaining the estimated parameters of the
mixture fit or explicitly the bias and inflation. Actually, the latter
two are the mean and standard deviation of the null component (mu.0
and sigma.0).
bc <- bacon(y)
bc## Bacon-object containing 1 set(s) of 5000 test-statistics.
## ...estimated bias: 0.18.
## ...estimated inflation: 1.3.
##
## Empirical null estimates are based on 5000 iterations with a burnin-period of 2000.estimates(bc)## p.0 p.1 p.2 mu.0 mu.1 mu.2 sigma.0 sigma.1 sigma.2
## [1,] 0.921 0.0519 0.0272 0.177 3.09 -3.02 1.31 2.79 2.51inflation(bc)## sigma.0
## 1.31bias(bc)## mu.0
## 0.177Several methods are provided to inspect the output of the Gibbs Sampler algorithm, such as traces-plots of all estimates, plots of posterior distributions, provide as a scatter plot between two parameters, and the actual fit of the three component mixture to the histogram of z-scores.
traces(bc, burnin=FALSE)
Figure 1: Plot of Gibbs Sampling traces
Each panel represent of one the estimated parameters. Default plot shows the burin-in period as well.
posteriors(bc)
Figure 2: Gibbs Sampling posterior distributions of two estimated parameters the inflation (sigma 0) and proportion of null features (pi0 0)
Posterior plots of the other parameters can be generated by using the thetas argument. The ellipical curves corresponding to a 75%, 90% and 95% probability regions for a bivariate normal distribution with mean and covariance estimated form the scatter-plot.
fit(bc, n=100)
Figure 3: Fit to the data as estimated using the Gibbs Sampling algorithm
Black line represent to overall fit, red the fit of the null distribution and blue and green the alternatives.
The previous three plots can be use as diagnostic tools to inspect the Gibbs sampling process.
There is also a generic plot function that can generate two types of plots; a histogram of the z-scores and a qq-plot. The histogram of the z-scores shows on top the standard normal distribution and the Gibbs Sampling estimated empirical null distribution. The quantile-quantile plot shows the \(-log_{10}\) transformed P-values. Default values are raw, not controlled for bias and inflation, z-scores and P-values.
plot(bc, type="hist")## Warning: The dot-dot notation (`..density..`) was deprecated in ggplot2 3.4.0.
## ℹ Please use `after_stat(density)` instead.
## ℹ The deprecated feature was likely used in the bacon package.
## Please report the issue to the authors.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.## `stat_bin()` using `bins = 30`. Pick better value with `binwidth`.
Figure 4: Histogram of z-scores
With on top standard normal (black) and estimated empirical null distribution (red).
plot(bc, type="qq")
Figure 5: Quantile-quantile plot of \(-log_{10}\) transformed P-values
Left panel using uncorrected P-values and right panel using bacon bias and inflation corrected P-values.
3 Multiple sets of test-statistics
Matrices containing \(5000\times6\) effect-sizes and standard errors are
generated to simulated data for a fixed-effect meta-analyses. This is
a toy-example just to illustrate the capabilities of bacon in
handling multiple sets of test-statics.
set.seed(12345)
biases <- runif(6, -0.2, 0.2)
inflations <- runif(6, 1, 1.3)
es <- matrix(nrow=5000, ncol=6)
for(i in 1:6)
es[,i] <- rnormmix(5000, c(0.9, biases[i], inflations[i], 0, 4, 1), shuffle=FALSE)
se <- replicate(6, 0.8*sqrt(4/rchisq(5000,df=4)))
colnames(es) <- colnames(se) <- LETTERS[1:ncol(se)]
rownames(es) <- rownames(se) <- 1:5000
head(rownames(es))## [1] "1" "2" "3" "4" "5" "6"head(colnames(es))## [1] "A" "B" "C" "D" "E" "F"By default the function bacon detects the number of cores/nodes
registered, as described in the BiocParallel, to
perform bacon in parallel. To run the vignette in general we set it
here for convenience to 1 node.
library(BiocParallel)
register(MulticoreParam(1, log=TRUE))
bc <- bacon(NULL, es, se)## Warning in .local(.Object, ...): test-statistics were not provided:
## teststatistics = effectsizes/standarderrors## Did you registered a biocparallel back-end?
## Continuing serial!bc## Bacon-object containing 6 set(s) of 5000 test-statistics.
## ...estimated bias: 0.065,0.092,0.088,0.051,0.018,-0.076.
## ...estimated inflation: 1.2,1.3,1.3,1.3,1.1,1.1.
##
## Empirical null estimates are based on 5000 iterations with a burnin-period of 2000.knitr::kable(estimates(bc))| p.0 | p.1 | p.2 | mu.0 | mu.1 | mu.2 | sigma.0 | sigma.1 | sigma.2 | |
|---|---|---|---|---|---|---|---|---|---|
| A | 0.868 | 0.072 | 0.060 | 0.065 | 2.65 | -2.66 | 1.19 | 3.64 | 3.21 |
| B | 0.877 | 0.071 | 0.052 | 0.092 | 2.80 | -2.75 | 1.29 | 3.02 | 3.70 |
| C | 0.852 | 0.081 | 0.066 | 0.088 | 2.62 | -2.73 | 1.30 | 3.22 | 3.37 |
| D | 0.832 | 0.059 | 0.109 | 0.051 | 3.02 | -1.16 | 1.33 | 1.55 | 4.61 |
| E | 0.881 | 0.058 | 0.060 | 0.018 | 2.69 | -2.61 | 1.15 | 4.04 | 3.45 |
| F | 0.861 | 0.061 | 0.079 | -0.076 | 2.79 | -2.65 | 1.15 | 3.54 | 3.25 |
inflation(bc)## A B C D E F
## 1.19 1.29 1.30 1.33 1.15 1.15bias(bc)## A B C D E F
## 0.0649 0.0923 0.0876 0.0514 0.0178 -0.0760knitr::kable(tstat(bc)[1:5,])| A | B | C | D | E | F |
|---|---|---|---|---|---|
| -0.669 | 0.609 | -0.613 | -0.722 | 0.182 | -0.986 |
| 0.360 | 0.261 | 0.243 | -3.209 | -0.783 | 2.517 |
| -0.488 | -0.036 | -0.134 | -0.803 | 0.793 | -0.272 |
| 0.115 | -2.721 | -0.911 | -1.584 | 0.461 | 0.296 |
| 0.568 | 0.909 | 1.925 | 0.841 | 2.025 | -1.191 |
knitr::kable(pval(bc)[1:5,])| A | B | C | D | E | F |
|---|---|---|---|---|---|
| 0.503 | 0.543 | 0.540 | 0.471 | 0.855 | 0.324 |
| 0.719 | 0.794 | 0.808 | 0.001 | 0.434 | 0.012 |
| 0.625 | 0.972 | 0.894 | 0.422 | 0.428 | 0.786 |
| 0.908 | 0.007 | 0.362 | 0.113 | 0.645 | 0.767 |
| 0.570 | 0.363 | 0.054 | 0.401 | 0.043 | 0.234 |
knitr::kable(se(bc)[1:5,])| A | B | C | D | E | F |
|---|---|---|---|---|---|
| 1.058 | 0.917 | 1.888 | 1.812 | 1.255 | 0.899 |
| 0.856 | 1.664 | 1.947 | 1.045 | 0.898 | 0.802 |
| 1.342 | 1.448 | 0.881 | 1.281 | 1.036 | 1.081 |
| 2.067 | 1.237 | 1.704 | 0.760 | 0.799 | 2.268 |
| 2.527 | 1.180 | 0.680 | 0.738 | 0.825 | 0.983 |
knitr::kable(es(bc)[1:5,])| A | B | C | D | E | F |
|---|---|---|---|---|---|
| -0.708 | 0.559 | -1.157 | -1.307 | 0.229 | -0.887 |
| 0.308 | 0.434 | 0.474 | -3.355 | -0.704 | 2.018 |
| -0.655 | -0.052 | -0.118 | -1.029 | 0.822 | -0.294 |
| 0.239 | -3.367 | -1.552 | -1.203 | 0.369 | 0.671 |
| 1.435 | 1.073 | 1.310 | 0.621 | 1.671 | -1.170 |
The accessor-function return as expected matrices of estimates. For the plotting functions an additional index of the ith study or z-score is required.
traces(bc, burnin=FALSE, index=3)
Figure 6: Plot of Gibbs Sampling traces
Each panel represent of one the estimated parameters. Default plot shows the burin-in period as well.
posteriors(bc, index=3)
Figure 7: Gibbs Sampling posterior distributions of two estimated parameters the inflation (sigma 0) and proportion of null features (pi0 0)
Posterior plots of the other parameters can be generated by using the thetas argument. The elliptical curves corresponding to a 75%, 90% and 95% probability regions for a bivariate normal distribution with mean and covariance estimated form the scatter-plot.
fit(bc, n=100, index=3)
Figure 8: Fit to the data as estimated using the Gibbs Sampling algorithm
Black line represent to overall fit, red the fit of the null distribution and blue and green the alternatives.
plot(bc, type="hist")## `stat_bin()` using `bins = 30`. Pick better value with `binwidth`.
Figure 9: Histogram of z-scores
With on top standard normal (black) and estimated empirical null distribution (red).
plot(bc, type="qq")
Figure 10: Quantile-quantile plot of \(-log_{10}\) transformed P-values
Left panel using uncorrected P-values and right panel using bacon bias and inflation corrected P-values.
4 Fixed-effect meta-analysis
The following code chunk shows how to perform fixed-effect meta-analysis and the inspection of results.
bcm <- meta(bc)
head(pval(bcm))## A B C D E F meta
## 1 0.503 0.5425 0.5400 0.47052 0.8553 0.3241 0.4406
## 2 0.719 0.7942 0.8077 0.00133 0.4336 0.0118 0.9664
## 3 0.625 0.9716 0.8937 0.42186 0.4276 0.7856 0.7636
## 4 0.908 0.0065 0.3625 0.11325 0.6448 0.7674 0.0620
## 5 0.570 0.3631 0.0542 0.40057 0.0429 0.2336 0.0223
## 6 0.279 0.1885 0.7669 0.56507 0.0229 0.3063 0.0111print(topTable(bcm))## eff.size.meta std.err.meta pval.adj.meta pval.org.meta tstat.meta
## 4976 -5.87 0.359 2.46e-56 4.93e-60 -16.3
## 4820 4.19 0.322 4.85e-35 9.69e-39 13.0
## 4617 5.26 0.404 5.10e-35 1.02e-38 13.0
## 4520 3.89 0.321 3.50e-30 7.00e-34 12.1
## 4919 4.54 0.378 1.58e-29 3.15e-33 12.0
## 4804 5.25 0.437 1.67e-29 3.35e-33 12.0
## 4562 4.59 0.384 3.39e-29 6.78e-33 11.9
## 4918 -4.20 0.366 9.85e-27 1.97e-30 -11.5
## 4567 -4.33 0.395 2.86e-24 5.71e-28 -11.0
## 4585 -3.42 0.312 3.46e-24 6.92e-28 -10.9
## eff.size.A std.err.A pval.A tstat.A eff.size.B std.err.B pval.B
## 4976 -0.6577 1.400 6.38e-01 -0.4699 -2.803 1.594 7.87e-02
## 4820 2.1473 0.805 7.66e-03 2.6668 -5.913 0.933 2.39e-10
## 4617 7.6367 0.948 7.65e-16 8.0596 1.249 0.976 2.01e-01
## 4520 0.6468 1.561 6.79e-01 0.4142 0.755 0.699 2.80e-01
## 4919 8.1045 0.571 1.05e-45 14.1905 -0.605 1.427 6.72e-01
## 4804 4.0377 1.029 8.78e-05 3.9220 -0.754 2.329 7.46e-01
## 4562 2.8163 0.848 8.98e-04 3.3208 8.665 0.607 2.87e-46
## 4918 -0.4046 1.467 7.83e-01 -0.2758 -7.779 1.046 1.01e-13
## 4567 0.0691 1.887 9.71e-01 0.0366 -6.144 0.861 9.68e-13
## 4585 -2.7347 0.966 4.65e-03 -2.8305 1.968 0.879 2.52e-02
## tstat.B eff.size.C std.err.C pval.C tstat.C eff.size.D std.err.D
## 4976 -1.758 -7.0701 1.336 1.21e-07 -5.2926 2.892 1.019
## 4820 -6.334 -9.1400 0.967 3.23e-21 -9.4551 1.069 2.114
## 4617 1.280 -2.2194 1.391 1.11e-01 -1.5958 -0.359 1.953
## 4520 1.081 1.4007 1.601 3.82e-01 0.8750 -0.502 0.673
## 4919 -0.424 1.8069 0.848 3.31e-02 2.1311 -3.252 1.175
## 4804 -0.324 1.7019 1.232 1.67e-01 1.3816 9.846 0.867
## 4562 14.281 5.7253 2.162 8.08e-03 2.6485 3.656 1.538
## 4918 -7.439 -1.4093 1.802 4.34e-01 -0.7819 -3.416 0.762
## 4567 -7.135 -0.0962 1.635 9.53e-01 -0.0588 -5.254 0.706
## 4585 2.239 5.1220 0.927 3.25e-08 5.5274 1.534 1.248
## pval.D tstat.D eff.size.E std.err.E pval.E tstat.E eff.size.F
## 4976 4.54e-03 2.838 -11.24 0.539 2.33e-96 -20.83 -2.26
## 4820 6.13e-01 0.506 10.65 0.454 1.98e-121 23.43 2.29
## 4617 8.54e-01 -0.184 5.17 0.861 2.01e-09 6.00 9.09
## 4520 4.56e-01 -0.746 10.24 0.526 2.89e-84 19.45 -0.35
## 4919 5.65e-03 -2.768 5.30 1.035 2.99e-07 5.12 5.50
## 4804 7.32e-30 11.351 5.76 0.840 7.38e-12 6.85 2.04
## 4562 1.74e-02 2.378 -4.46 1.364 1.07e-03 -3.27 2.19
## 4918 7.44e-06 -4.481 -6.21 0.637 1.69e-22 -9.76 -1.49
## 4567 9.51e-14 -7.448 -9.74 0.841 5.35e-31 -11.58 4.87
## 4585 2.19e-01 1.229 -7.20 0.425 2.75e-64 -16.93 -3.27
## std.err.F pval.F tstat.F
## 4976 0.730 1.96e-03 -3.097
## 4820 1.105 3.80e-02 2.075
## 4617 0.739 7.89e-35 12.311
## 4520 0.975 7.20e-01 -0.359
## 4919 1.627 7.23e-04 3.381
## 4804 1.200 8.97e-02 1.697
## 4562 0.815 7.17e-03 2.689
## 4918 0.798 6.16e-02 -1.869
## 4567 1.003 1.21e-06 4.854
## 4585 1.347 1.53e-02 -2.425plot(bcm, type="qq")
Figure 11: Quantile-quantile plot of \(-log_{10}\) transformed P-values for each cohort and the meta-analysis P-values
Left panel using uncorrected P-values and right panel using bacon bias and inflation corrected P-values.
5 Adjustment with 95% CI
Here we describe how inflation- and bias-corrected statistics with a 95% Confidence Interval (CI) can be constructed.
Given a vector of z-scores. Replicate the z-scores, minimal 30 times, and store in a matrix.
zs <- rnormmix(5000, c(0.9, 0.2, 1.3, 1, 4, 1))This is a toy-example just to illustrate how bacon can be used to create
a sampling distributions of metrics output from bacon therefore we just use 10 replicates to speedup the calculations.
zs <- cbind(zs, matrix(zs, nrow=5000, ncol=9))
colnames(zs) <- c(paste0("A", 1:10))
rownames(zs) <- 1:5000
head(rownames(zs))## [1] "1" "2" "3" "4" "5" "6"head(colnames(zs))## [1] "A1" "A2" "A3" "A4" "A5" "A6"By default the function bacon sets a global seed for random number
generation (RNG) that occurs in the Gibbs Sampling process. The global seed
is sufficient for controlling the RNG when the input is a single-vector or
a matrix so that each call to bacon produces the same results. Since
BiocParallel performs RNG independently of the global environment,
the globalSeed can be set to NULL to allow RNG across each parallel
process that calls bacon, and the parallelSeed (default 42) used by
BiocParallel will control the RNG so that a separate call to bacon with
the same input matrix will produce the same ‘randomized’ results.
library(BiocParallel)
register(MulticoreParam(1, log=TRUE))
bc <- bacon(teststatistics = zs,
globalSeed = NULL,
parallelSeed = 42)## Did you registered a biocparallel back-end?
## Continuing serial!bc## Bacon-object containing 10 set(s) of 5000 test-statistics.
## ...estimated bias: 0.14,0.15,0.15,0.15,0.15,0.14,0.15,0.15,0.15,0.14.
## ...estimated inflation: 1.3,1.3,1.3,1.3,1.3,1.3,1.3,1.3,1.3,1.3.
##
## Empirical null estimates are based on 5000 iterations with a burnin-period of 2000.head(inflation(bc))## A1 A2 A3 A4 A5 A6
## 1.32 1.32 1.32 1.32 1.32 1.32head(bias(bc))## A1 A2 A3 A4 A5 A6
## 0.145 0.146 0.146 0.145 0.145 0.145The resulting sampling distributions can be used to calculate the average estimated inflation and bias metrics with a 95% CI. Averaged inflation- and bias- adjusted z-scores and p-values can also be easily extracted.
For example, overall average bias and inflation:
mean_bias <- mean(bias(bc))
mean_bias## [1] 0.145mean_inflation <- mean(inflation(bc))
mean_inflation## [1] 1.32The 95% confidence intervals:
CI_bias <- quantile(bias(bc), c(0.025, 0.975))
CI_bias## 2.5% 97.5%
## 0.145 0.146CI_inflation <- quantile(inflation(bc), c(0.025, 0.975))
CI_inflation## 2.5% 97.5%
## 1.32 1.32And average inflation- and bias-corrected z-scores and P-values:
avg_corrected_zs <- rowMeans(tstat(bc))
avg_corrected_zs[1:5]## 1 2 3 4 5
## 7.733 1.947 -1.332 0.174 -0.428avg_corrected_pvals <- rowMeans(bacon::pval(bc))
avg_corrected_pvals[1:5]## 1 2 3 4 5
## 1.05e-14 5.16e-02 1.83e-01 8.62e-01 6.68e-016 Session Info
Here is the output of sessionInfo() on the system on which this
document was compiled:
## R Under development (unstable) (2024-10-21 r87258)
## Platform: x86_64-pc-linux-gnu
## Running under: Ubuntu 24.04.1 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.21-bioc/R/lib/libRblas.so
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.12.0
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_GB LC_COLLATE=C
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## time zone: America/New_York
## tzcode source: system (glibc)
##
## attached base packages:
## [1] stats graphics grDevices utils datasets methods base
##
## other attached packages:
## [1] bacon_1.35.0 ellipse_0.5.0 BiocParallel_1.41.0
## [4] ggplot2_3.5.1 BiocStyle_2.35.0
##
## loaded via a namespace (and not attached):
## [1] gtable_0.3.6 jsonlite_1.8.9 crayon_1.5.3
## [4] highr_0.11 dplyr_1.1.4 compiler_4.5.0
## [7] BiocManager_1.30.25 Rcpp_1.0.13 tinytex_0.53
## [10] tidyselect_1.2.1 magick_2.8.5 parallel_4.5.0
## [13] jquerylib_0.1.4 scales_1.3.0 yaml_2.3.10
## [16] fastmap_1.2.0 R6_2.5.1 labeling_0.4.3
## [19] generics_0.1.3 knitr_1.48 tibble_3.2.1
## [22] bookdown_0.41 munsell_0.5.1 bslib_0.8.0
## [25] pillar_1.9.0 rlang_1.1.4 utf8_1.2.4
## [28] cachem_1.1.0 xfun_0.48 sass_0.4.9
## [31] cli_3.6.3 withr_3.0.2 magrittr_2.0.3
## [34] digest_0.6.37 grid_4.5.0 lifecycle_1.0.4
## [37] vctrs_0.6.5 evaluate_1.0.1 glue_1.8.0
## [40] farver_2.1.2 codetools_0.2-20 fansi_1.0.6
## [43] colorspace_2.1-1 rmarkdown_2.28 tools_4.5.0
## [46] pkgconfig_2.0.3 htmltools_0.5.8.1