1 Introduction to GenomicDistributions

If you have a set of genomic ranges, the GenomicDistributions R package can help you visualize properties of your region set. GenomicDistributions produces these nine types of plot:

chromosome distribution plot - visualizes how your regions are distributed over chromosomes
width distribution plot - visualizes the distribution of range widths
feature distance distribution plot - visualizes how your regions are distributed in distance to the nearest feature of interest, like Transcription Start Sites (TSSs).
partition distribution plot - visualizes how your regions are distributed across a genomic partitioning, such as frequency of overlapping a gene body, exon, promoter, intronic, or intergenic segment.
specificity of accessibility plot - visualizes tissue specificity of a set of genomic ranges. In addition to your input genomic ranges, this plot type requires a tissue specificity data matrix, which contains a set of genomic regions that have been annotated for tissue specificity signal levels for tissues of interest.
neighboring regions distance - visualizes the distance between chromosomes neighboring regions.
GC content plot - visualizes a probability density function of GC content percentage over the genomic ranges in the query.
dinucleotide frequency - visualizes dinucleotide content within your regions.

GenomicDistributions can work with any reference genome, as long as you have some annotation data for it (like chromosome sizes and locations of genes). To make things easier for the common use cases, I’ve included in the package basic metadata for the most commonly used features from the reference genomes I use most (hg19, hg38, and mm10). If you need to produce similar plots with different features, partitions, or reference assemblies, that’s also possible, and not much more difficult; GenomicDistributions is very modular and will work with other bioconductor packages to process that data, but it requires one or two additional steps to curate your reference data (see the Custom reference and features section of this vignette).

In this vignette, we’ll go through examples of each of the plots using my common built-in features and partitions. If you want more control, there’s another advanced vignette that will introduce you how to define your own features, partitions, and chromosome sizes for custom analysis.

1.1 Philosophy of modular calc and plot functions

Before we start, I want to explain the design philosophy for functions in this package. Many R plotting packages combine calculations and plotting into one function. This may seem convenient, but if you want to plot the calculation results in a different way or combine them with something else, you can’t because you only have access to the final plot. GenomicDistributions divides these tasks so you can use the intermediate data to design your own custom plot, or use the calculated results directly for other analysis.

In GenomicDistributions, each plot type has two functions: a calculate function and a plot function. The calculate functions take your GRanges object and return a table of summary results. You can use these summary statistics how you like – aggregate them across multiple region sets, insert them into other plots you have, and so forth; or, you can simply plug that result directly into the corresponding plot function, which returns a ggplot2 object. Separating the calculation and plotting functions like this gives you more control over your results.

1.2 Installing GenomicDistributions

Install GenomicDistributions like this:

if (!requireNamespace("BiocManager", quietly = TRUE))
install.packages("BiocManager")
BiocManager::install("GenomicDistributions")

Or alternatively you can install from GitHub:

devtools::install_github("databio/GenomicDistributions")

1.3 Loading genomic range data

Start by loading up the package and getting your query set of regions as a GenomicRanges object. I’ve included an example bed file to demonstrate how these plots look. You can load it up like this:

library("GenomicDistributions")
queryFile = system.file("extdata", "vistaEnhancers.bed.gz", package="GenomicDistributions")
query = rtracklayer::import(queryFile)

2 GenomicDistributions plot types

2.1 Chromosome distribution plots

Chromosome distribution plots help you visualize how your regions are distributed across chromosomes. To produce these, you’ll need to specify the chromosome lengths for your reference assembly. There are a few ways to do this.

For the common reference assemblies that I use (hg19, hg38, mm9, and mm10), I’ve included the metadata in the package. If you’re working with one of these genomes, making a plot of the distribution across chromosomes takes just a couple of lines of code:

# First, calculate the distribution:
x = calcChromBinsRef(query, "hg19")

# Then, plot the result:
plotChromBins(x)

What if we want to do the same thing but on 2 query sets at the same time? No problem:

# Let's fudge a second region set by shifting the first one over 
query2 = GenomicRanges::shift(query, 1e6)
queryList = GRangesList(vistaEnhancers=query, shifted=query2)
x2 = calcChromBinsRef(queryList, "hg19")
plotChromBins(x2)

## Warning: Removed 1 rows containing missing values (geom_bar).

These functions just do a naive binning across the genome. If you want to tweak the way the bins are handled, or use a different reference assembly, that’s also possible and is only slightly more complicated. There are other functions you can use for that, which are outlined in another vignette.

2.2 Feature distance distribution plots

Feature distance distribution plots will show you how your regions are distributed with respect to the nearest feature of interest. To illustrate, we’ll use Transcription Start Sites (TSS) as our example feature of interest (but really, you can use any region set).

For TSS plots, since this is such a common use case, we can use a handy built-in function that does everything for us. It’s just one line of code to check distances from query to your TSSs (for common genomes), and then a second line of code to plot those distances:

# Calculate the distances:
TSSdist = calcFeatureDistRefTSS(query, "hg19")

# Then plot the result:
plotFeatureDist(TSSdist, featureName="TSS")

## Warning: `guides(<scale> = FALSE)` is deprecated. Please use `guides(<scale> =
## "none")` instead.

Figure 1: TSS plot
Distribution of query regions relative to TSSs

This plot uses log-scale increasing bins to show how your regions are distributed. Now, let’s make a similar plot with multiple region sets input:

TSSdist2 = calcFeatureDistRefTSS(queryList, "hg19")
plotFeatureDist(TSSdist2, featureName="TSS")

## Warning: `guides(<scale> = FALSE)` is deprecated. Please use `guides(<scale> =
## "none")` instead.

Figure 2: TSS plots with multiple region sets

You can also plot a tiled version that aligns them all vertically, and you can sort the datasets based on the values in the center:

plotFeatureDist(TSSdist2, featureName="TSS", tile=TRUE, labelOrder = "center")

Figure 3: Tiled feature distance plot
Distribution of query regions relative to arbitrary features

If you want to check distances to other features, that’s no problem; calcFeatureDistRefTSS() is really just a wrapper for the workhorse function, calcFeatureDist(). To show how this works, get some features you want to check the distance to. Here, let’s just shift our query set by a normally distributed random number:

featureExample = GenomicRanges::shift(query, round(rnorm(length(query), 0,1000)))

Now, with these features, we just use the calcFeatureDist function to calculate the distances. This function uses the fast rolling joins from data.table under the hood, so it completes very quickly. The result of this gets piped right into the plotting function as before:

fdd = calcFeatureDist(query, featureExample)
plotFeatureDist(fdd)

## Warning: `guides(<scale> = FALSE)` is deprecated. Please use `guides(<scale> =
## "none")` instead.

Figure 4: Feature distance plot
Distribution of query regions relative to arbitrary features

2.3 Partition distribution plots

Genomic partition distribution plots show you how your regions are distributed across genome annotation classes. This is most commonly used to show the distribution over element types, such as promoters, exons, introns, or intergenic regions. GenomicDistributions provides 3 types of partition distribution plots: percentages, expected, and cumulative.

2.3.1 Percentage partition distribution plots

The most basic partition plot just provides a barplot of percentage region overlaps. You can produce one or two-set plots like so:

gp = calcPartitionsRef(query, "hg19")
plotPartitions(gp)

Figure 5: Partition distribution plot
Percentage distribution of query regions across genomic features

gp2 = calcPartitionsRef(queryList, "hg19")
plotPartitions(gp2)

Figure 6: Partition distribution plot for multiple query region sets

If you wish, you can also plot the raw overlaps across a defined set of partitions, simply by setting the logical numbers to TRUE:

# Plot the results:
plotPartitions(gp2, numbers=TRUE)

Figure 7: Raw partition distribution plot for multiple regionsets

In this plot regions are classified based on overlaps with annotation classes that are given priority. Once an overlap is found between a query region and an annotation class of high priority, it is not tested for overlaps with annotation classes with lower priorities. In calcPartitionsRef function annotation classes are sorted from highest to lowest priority in following order: core promoter, proximal promoter, 3’untranslated region (3’UTR), 5’UTR, exon, intron and regions not falling into any of these are classified as intergenic. If you are more interested in proportional overlap, i.e. what percentage of bp from your region sets fall into each annotation class, you can just set the bpProportion=TRUE.

gp3 = calcPartitionsRef(queryList, "hg19", bpProportion=TRUE)
plotPartitions(gp3)

Figure 8: Proportional partition distribution plot for multiple query region sets

2.3.2 Expected partition distribution plots

A more useful variation of this plot corrects the values for the expected genome distribution. This accounts for the fact that the distribution of intergenic vs promoter space in the genome is not uniform. Here, we produce one or two-set plots showing the log₁₀(\(\frac{observed}{expected}\)) of the distribution of your regions across genomic partitions:

ep = calcExpectedPartitionsRef(query, "hg19")
plotExpectedPartitions(ep)

Expected partition distribution plot. Distribution of query regions across genomic features relative to the expected distribution of those features.

Figure 9: Expected partition distribution plot
Distribution of query regions across genomic features relative to the expected distribution of those features.

And can you do 2 at a time? Indeed:

ep2 = calcExpectedPartitionsRef(queryList, "hg19")
plotExpectedPartitions(ep2)

Figure 10: Expected partition distribution plots for multiple query region sets

These plots would show all values aligning at 0 if your given regions perfectly match the expected genomic distribution. In this case, we see an 1.5-fold enrichment of introns over the background genome distribution, along with a concomitant decrease in other partitions.

If you are again more interested at proportions how are your regions distributed among the different annotation classes (rather than classification with priority), it is very easy. Let’s see:

ep3 = calcExpectedPartitionsRef(queryList, "hg19", bpProportion=TRUE)
plotExpectedPartitions(ep3)

Figure 11: Expected proportional partition distribution plots for multiple query region sets

Here you can see that even though the differences in observed partition distribution with priority vs. proportional classification are in our example case subtle, the expected partition distribution changed drastically. Given that vistaEnhancers are enhancer regions, thus should be enriched in intergenic space, the proportional classification describes this dataset better.

2.3.3 Cumulative partition distribution plots

The final type of partition plot is the cumulative partition distribution plots. These are a relatively less widespread type of plot that we recently developed. The cumulative partition plot provides an information-dense look into the genomic distribution of regions relative to genomic features. This analysis uses a cumulative distribution to visualize how quickly the final region count is accumulated in features of a given type. To calculate, we overlap each region with a feature set of genomic annotations, as before. The individual feature elements are then sorted by read count, and for each feature, we traverse the sorted list and calculate the cumulative sum of regions found in that feature divided by the total number of regions. We plot the fraction against the \(log_{10}\) transformed cumulative size of all loci for each feature. This allows the identification of enriched features while correcting for total features and total genomic space.

Now, we’ll plot single and multiple cumulative distributions of regions in genomic partitions:

cp = calcCumulativePartitionsRef(query, "hg19")
plotCumulativePartitions(cp)

Figure 12: Cumulative partition distribution plot
Cumulative distribution of query regions across genomic features.

Can you plot 2 of these? You can:

cp2 = calcCumulativePartitionsRef(queryList, "hg19")
plotCumulativePartitions(cp2)

Figure 13: Cumulative partition distribution plots for multiple query region sets

If you’re not familiar with these plots, interpreting them can take a minute to familiarize yourself. Each curve represents a partition type. Then terminal (rightmost) endpoint of each curve is the percentage of query regions that overlap this partition type in total. The shape of the curve, and when it arises on the x-axis, demonstrates the size in terms of raw nucleotide coverage that must be accumulated in order to achieve the corresponding percent coverage.

In this plot, we see that intergenic regions reach a higher total point than intronic regions – which is also reflected in the raw partition plot above. What we see additionally in this plot is that the intergenic spaces also cover a much larger portion of the genome, as indicated by their more more left shifted in the plot.

If you want to see how your regions are distributed among other partitions, like CpG islands, enhancers, or something else, GenomicDistributions also has functions to produce priority lists from any GRanges objects.

2.4 Specificity of accessibility plots

One feature we are often interested in is the tissue specificity of a set of genomic ranges. To visualize this, GenomicDistributions provides functions to calculate and plot the tissue specificity. In addition to your input genomic ranges, this plot type requires a tissue specificity data matrix. This matrix should contain a set of genomic regions that have been annotated for tissue specificity signal levels for tissues of interest.

We have produced example reference data matrixes based on ENCODE accessibility information, which can be downloaded from big.databio.org. Here, we’ll demonstrate how this works with some tiny built-in example reference data. For examples of use with the full size matrix see full-power vignette.

In this example we show bar plots with median of signal values across regions being plotted. Otherr offered plotting options are jitter plot showing all signal values across query regions, box plot, and violin plot (with indicated medians).

exampleCellMatrixFile = system.file("extdata", "example_cell_matrix.txt", package="GenomicDistributions")
cellMatrix = data.table::fread(exampleCellMatrixFile)
op = calcOpenSignal(query, cellMatrix)
plotOpenSignal(op)

Figure 14: Specificity of chromatin accessibility across cell types

To plot multiple datasets at a time:

op2 = calcOpenSignal(queryList, cellMatrix)
plotOpenSignal(op2)

Figure 15: Specificity of chromatin accessibility across cell types

There are also multiple plotting options. Do you maybe prefer violin plots with highlighted medians? Here it is:

plotOpenSignal(op2, plotType = "violinPlot")

Figure 16: Violijn plot: chromatin accessibility across cell types

2.5 Neighboring regions distance plots

Genomic Distributions can also generate some basic stats about your regionset. One of those includes the distance between chromosomes neighboring regions. Distances are calculated for each specific chromosome and then lumped together to get a more comprehensive view of the entire regionset. Distances have been log10 transformed to ease comparison between different regionsets and account for outliers.

# Calculate the distances 
nd = calcNeighborDist(query)

# Plot the distribution
plotNeighborDist(nd)

Figure 17: Distances between neighboring intervals of a regionset

You can also look at the distances distribution for more than one regionset:

# Create a list of GRanges objects
s = system.file("extdata", "setB_100.bed.gz", package="GenomicDistributions")
setB = rtracklayer::import(s)
queryList2 = GRangesList(vistaEnhancers=query, setB=setB)

# Calculate the distances
dist2 = calcNeighborDist(queryList2)

# Plot the distribution
plotNeighborDist(dist2)

Figure 18: Neighboring regions distance for multiple regionsets

2.6 GC content plots

GC content plots display a probability density function of GC content percentage over the genomic ranges in the query. These plots will not be shown in the vignette because they require large BSgenome packages, which contain the full reference sequence.

# Calculate the GC content
gc1 = calcGCContentRef(query, "hg19")

# Plot the GC distribution
plotGCContent(gc1)

You can also plot the probability distribution for more than one query:

gc2 = calcGCContentRef(queryList, "hg19")
plotGCContent(gc2)

2.7 Dinucleotide frequency plots

With these set of functions you can calculate and plot what is the dinucleotide content within the regions of interest. The dinucleotide content is calculated for each query region and is then summarized in form of violin plot for the whole region set. These plots will not be shown here either, as they also require large BSgenome packages. Check out “full-power vignette” for examples of these plots.

df1 = calcDinuclFreqRef(query, "hg19")
plotDinuclFreq(df1)

You can also plot the density of each dinucleotide for more than one query:

df2=calcDinuclFreqRef(queryList, "hg19")
plotDinuclFreq(df2)

Are you interested in the actual number of dinucleotides per region rather than dinucleotide frequencies? This can be easily done be setting the parameter rawCounts=TRUE.

df3=calcDinuclFreqRef(queryList, "hg19", rawCounts=TRUE)
plotDinuclFreq(df3)

2.8 Width distribution plots

Width distribution plots display a quantile-trimmed histogram (qthist) of widths of the genomic ranges in the query. These plots are quantile-trimmed to preserve the visual shape of the distribution in the face of extreme outliers which sometimes occur in genomic ranges.

# Calculate the widths
qt1 = calcWidth(query)

# Plot the width distribution
plotQTHist(qt1)

Figure 19: Width distribution plot
Frequency of widths in this query

You can also plot the frequency distribution for more than one query.

qt2 = calcWidth(queryList)
plotQTHist(qt2)

Figure 20: Multiple width distribution plots

Both the quantile and the bins can be manually adjusted. The quantile you indicate should be the proportion of the data that you want in each end bar of the histogram. You can also adjust the colors of these plots:

plotQTHist(qt1, bins=7, quantile = .015, EndBarColor = 'black', MiddleBarColor='darkblue')

Figure 21: Width distribution plot with color options

3 Custom reference and features

3.1 Custom reference

GenomicDistributions package comes with a limited reference data set. There are only files that support hg19 human reference genome (use GenomicDistributionsData for hg19, hg38 and mm10 genome reference data - see full-power vignette). If you need any reference data outside of this selection, these can be easily generated with functions included in this package.

Here we’ll go over the steps to generate reference data for a C. Elegans genome assembly (Caenorhabditis_elegans.WBcel235.103).

All we need to generate the custom reference data set are two local or remote files. We will use remote files from Ensembl FTP server:

fastaSource = "http://ftp.ensembl.org/pub/release-103/fasta/caenorhabditis_elegans/dna/Caenorhabditis_elegans.WBcel235.dna.toplevel.fa.gz"
gtfSource = "http://ftp.ensembl.org/pub/release-103/gtf/caenorhabditis_elegans/Caenorhabditis_elegans.WBcel235.103.gtf.gz"

3.1.1 Get chromosome sizes

Let’s first have a look, how to extract chromosome sizes:

CEelegansChromSizes = getChromSizesFromFasta(source=fastaSource)

You can now these to a getGenomeBins function that will create equaly sized bins that can passed to calcChromBins function as bins argument:

bins  = getGenomeBins(CEelegansChromSizes)

3.1.2 Transcription start sites (TSS)

Now, let’s see, how to extract transcription start sites:

CEelegansTSSs = getTssFromGTF(source=gtfSource, convertEnsemblUCSC=TRUE)

You can now pass the CEelegansTSSs to calcFeatureDist function as a feature argument to get the distances of your query regions to the nerest TSS.

3.1.3 Gene models

What about gene models for partition plots?

features = c("gene", "exon", "three_prime_utr", "five_prime_utr")
CEelegansGeneModels = getGeneModelsFromGTF(source=gtfSource, features=features, convertEnsemblUCSC=TRUE)

You can now pass the CEelegansGeneModels object to genomePartitionList function, which created list of genomic partitions that are then passed to calcPartitions function as partitionList argument.

partitionList = genomePartitionList(CEelegansGeneModels$gene, 
                                    CEelegansGeneModels$exon,
                                    CEelegansGeneModels$three_prime_utr, 
                                    CEelegansGeneModels$five_prime_utr)

3.2 Custom features (partitions)

Are you missing certain features (e.g. enhancers) in the list of provided partitions for partition plots? You can include custom partitions in few easy steps! In this example we’ll add enhancers to the list of partitions.

First, we’ll grab all of the Ensembl predicted enhancers for hg19 from the ensembl regulatory build.

funcgen = biomaRt::useMart("ENSEMBL_MART_FUNCGEN", host="grch37.ensembl.org")
funcgen = biomaRt::useDataset("hsapiens_regulatory_feature", mart=funcgen)

enhancers = biomaRt::getBM(attributes=c('chromosome_name', 
                                        'chromosome_start',
                                        'chromosome_end',
                                        'feature_type_name'), 
                  filters='regulatory_feature_type_name', 
                  values='Enhancer', 
                  mart=funcgen)

Then we’ll convert chromosome names to the UCSC naming convention to match included partitions. Next, follow that up by converting this into a GenomicRanges object.

enhancers$chromosome_name = paste("chr", enhancers$chromosome_name, sep="")

gr1 = GenomicRanges::sort(GenomeInfoDb::sortSeqlevels(
    GenomicDistributions::dtToGr(enhancers,
                                 chr="chromosome_name",
                                 start="chromosome_start",
                                 end="chromosome_end")))

Now we can add our enhancers GenomicRanges object to the list of partitions we can obtain from the GenomicDistributions package itself.

geneModels = GenomicDistributions::getGeneModels("hg19")
partitionList = GenomicDistributions::genomePartitionList(geneModels$genesGR, 
                                                          geneModels$exonsGR,
                                                          geneModels$threeUTRGR, 
                                                          geneModels$fiveUTRGR)
partitionList[["enhancer"]] = gr1

You can now pass the newly generated partitionList that includes enhancers to calcPartitions function.

4 Conclusion

GenomicDistributions provides a variety of ways to visualize your data. 3 key features make it very useful: First, it uses a modular, systematic way to name calc and plot functions, and the function names and interfaces are all consistent. Second, it is optimized for speed. You will find these functions to be much faster than other commonly accepted alternatives due to way we’ve written the functions under the hood. And finally, it provides a single, convenient package for many types of plots, so you don’t have to look around in multiple places.

Getting started with GenomicDistributions

2021-10-26

Contents